Smart Appliances — LG, GE, Midea, Dyson, iQua, Orbit BHyve

LG SmartThinQ Sensors

Integration: smartthinq_sensors (HACS) | Status: setup_retry | Pending update: v0.43.0

Devices

Key entities:

• climate.fridge / climate.freezer — fridge/freezer temperature control
• sensor.dry_level — dryer dry level
• sensor.ge_profile_oven_srhv558129p_cook_mode — oven state
• Wash/dry mode selectors, run state sensors

Action required: Apply HACS update v0.43.0 and restart HA.

GE Home (SmartHQ)

Integration: ge_home (HACS) | Account: jeeves5454@gmail.com | Pending update: v2026.2.1

Devices

Key entities:

• sensor.ge_profile_oven_srhv558129p_srhv558129p_cook_mode — active cook mode
• water_heater.ge_profile_oven_srhv558129p_srhv558129p_oven — oven (water_heater domain used for temp control)

Action required: Apply HACS update v2026.2.1 and restart HA.

Midea Dehumidifier (LAN)

Integration: midea_dehumidifier_lan (HACS) | Status: loaded

Device

Entities:

• humidifier.dehumidifier_71b6 — on/off, target humidity
• fan.dehumidifier_71b6_fan — fan speed
• switch.dehumidifier_71b6_pump / switch.dehumidifier_71b6_pump_enabled
• sensor.dehumidifier_71b6_* — humidity readings

Dyson Pure Hot+Cool Link (Local)

Integration: dyson_local (HACS) | Status: loaded

Device

Entities:

• fan.dyson_fan — speed, oscillation, night mode
• climate.pure_hot_cool_link — heat mode, temperature
• sensor.pure_hot_cool_link_filter_life — HEPA filter remaining life
• Air quality sensors (PM2.5, VOC, NO2, formaldehyde)

Automation: Heat Bedroom uses this device.

iQua Water Softener

Integration: iqua_softener (HACS) | Status: loaded

Device

Entities:

• switch.iqua_softener_rhw4221_24178_4056_water_shutoff_valve
• select.iqua_softener_rhw4221_24178_4056_efficiency_mode
• Various water quality sensors

Orbit BHyve (Irrigation)

Integration: bhyve (HACS) | Status: loaded

Devices

Entities:

• valve.* — 4 irrigation zone valves
• switch.*_program — watering programs
• switch.*_rain_delay — rain skip
• sensor.*_next_watering — next scheduled run
• binary_sensor.bhyve_hub_connected
• binary_sensor.front_yard_tap_timer_fault

See area-front-yard.md for full irrigation zone details.

LetPot (Hydroponic Gardens)

Integration: letpot | Status: setup_retry | Account: jeeves5454@gmail.com

Devices

Currently in setup_retry — likely an authentication/network issue.

Notes / Gotchas

• Three integrations need HACS updates and HA restart: smartthinq_sensors (v0.43.0), ge_home (v2026.2.1), govee (v2026.6.20).
• Dyson Local uses local LAN communication — does not require Dyson cloud account to function after initial setup.
• The iQua Water Shutoff Valve is a safety-critical entity — automations should NOT accidentally toggle it.

Last Updated

2026-06-24