# End Devices — Network Interfaces

## Overview

Key server and endpoint devices and their physical network interface configuration. All servers are assigned **static IPs configured at the UCG Fiber**. All other devices use DHCP (with or without reservations — to be documented separately).

> Full static IP and DHCP reservation mapping is out of scope for this page — see **Network → Logical Configuration → IP Address Management** (future page).

---

## Server & Key Endpoint Interfaces

| Device | Hostname | Location | NIC Speed | Switch | IP Assignment |
|---|---|---|---|---|---|
| MiniPC Intel Core Ultra 9 | Centerpoint | Office | 2.5GbE onboard | MokerLink | Static (UCG) |
| QNAP TS-873 (UnRAID) | Lusankya | Office | 2.5GbE NIC | MokerLink | Static (UCG) |
| N100 Server (Home Assistant OS) | Corsec | Media Room | 1GbE onboard | Media Room Switch #2 | Static (UCG) |
| Gaming PC (RTX 3060) | Halcyon | Media Room | 1GbE onboard | Media Room Switch #2 (daisy-chained) | Static (UCG) |
| UniFi Cloud Gateway Fiber | Whistler | Network Closet | 10GbE WAN + multi-port LAN | Core (is the switch root) | Static (self) |

---

## Notable Interface Constraints

- **Halcyon** is currently wired in the Media Room via daisy-chained 1GbE unmanaged switches off a single Cat5a wall drop — bandwidth is shared with all other Media Room devices including CorSec, Smart Hubs, TV, Xbox, and PS4
- **Lusankya** has a 2.5GbE NIC but the QNAP TS-873 onboard NICs are 1GbE — confirm which NIC is active for primary traffic
- **Centerpoint** 2.5GbE is the bottleneck on the MokerLink → GigaPlus SFP+ uplink for inter-server traffic; Lusankya is on the same segment

---

## Outstanding Action Items

- [ ] Document full static IP table and DHCP reservation list (separate page)
- [ ] Confirm Lusankya active NIC (onboard 1GbE vs add-in 2.5GbE)
- [ ] Evaluate moving Halcyon to Office switch when rack buildout is complete (dedicated Cat6 run consideration)

## Last Updated
2026-06-18