End Devices — Network Interfaces

Overview
Key server and endpoint devices and their physical network interface configuration. All servers are assigned static IPs configured at the UCG Fiber. All other devices use DHCP (with or without reservations — to be documented separately).
Full static IP and DHCP reservation mapping is out of scope for this page — see Network → Logical Configuration → IP Address Management (future page).
Server & Key Endpoint Interfaces
Device
Hostname
Location
NIC Speed
Switch
IP Assignment
MiniPC Intel Core Ultra 9
Centerpoint
Office
2.5GbE onboard
MokerLink
Static (UCG)
QNAP TS-873 (UnRAID)
Lusankya
Office
2.5GbE NIC
MokerLink
Static (UCG)
N100 Server (Home Assistant OS)
Corsec
Media Room
1GbE onboard
Media Room Switch #2
Static (UCG)
Gaming PC (RTX 3060)
Halcyon
Media Room
1GbE onboard
Media Room Switch #2 (daisy-chained)
Static (UCG)
UniFi Cloud Gateway Fiber
Whistler
Network Closet
10GbE WAN + multi-port LAN
Core (is the switch root)
Static (self)
Notable Interface Constraints
Halcyon is currently wired in the Media Room via daisy-chained 1GbE unmanaged switches off a single Cat5a wall drop — bandwidth is shared with all other Media Room devices including CorSec, Smart Hubs, TV, Xbox, and PS4
Lusankya has a 2.5GbE NIC but the QNAP TS-873 onboard NICs are 1GbE — confirm which NIC is active for primary traffic
Centerpoint 2.5GbE is the bottleneck on the MokerLink → GigaPlus SFP+ uplink for inter-server traffic; Lusankya is on the same segment
Outstanding Action Items
 Document full static IP table and DHCP reservation list (separate page)
 Confirm Lusankya active NIC (onboard 1GbE vs add-in 2.5GbE)
 Evaluate moving Halcyon to Office switch when rack buildout is complete (dedicated Cat6 run consideration)
Last Updated
2026-06-18